HP-UX 11i September 2001 Release Notes

Installation
Ignite-UX Changes (updated for June 2001)
Chapter 6
106
Ignite-UX Changes (updated for June 2001)
Ignite-UX Version B.3.4
Ignite-UX (IUX) Version B.3.4 is an HP-UX administration toolset to help you install
and configure or recover HP-UX systems.
The complete Ignite-UX product, with support for HP-UX 11i, 11.0 and 10.20, is
available on the first CD of the 11i OE media kit.
NOTE Ignite-UX will not be installed by default when updating the entire operating system
from 10.20 or 11.00 to 11i even if the system currently is an Ignite-UX server.
Updating your Ignite-UX server to 11i and Ignite -UX version B.3.3 or newer will ensure
that you have the latest version of make_net_recovery and make_tape_recovery.
make_net_recovery has added most of the command line options that used to only be
in make_recovery. make_tape_recovery is the replacement for make_recovery and
allows you to control tape creation on a client system from your Ignite-UX server. For
details on updating an Ignite-UX server, see Chapter 3 of the HP-UX 11i Installation
and Update Guide.
If you are cold installing a system, you can select Ignite-UX from the software selection
screen to be installed at the same time the rest of the OS is installed.
By default, running Ignite-UX will install the core HP-UX 11i files, networking drivers,
and the OE. You can deselect the OE but you cannot install an OE subset using
Ignite-UX. Also some of the networking drivers are not deselectable.
Impact
Ignite-UX, Version B, no longer supports the installation of 10.01 and 10.10 machines for
11i. The B Version will continue to support 10.20 and later operating system revisions.
In addition, Version B will only operate on HP-UX machines that have at least 64MB of
RAM. Previously, HP-UX machines that had at least 32MB of RAM were supported.
Version A is not affected by these changes.
Version B supports the 64MB IUX servers and HP-UX machines; Version A supports
32MB IUX servers and HP-UX machines.
Table 6-1 Ignite-UX 11i Version B vs Version A Support
Version B Version A
IUX Revision Number B.3.3 A.3.3
HP-UX Releases Supported 10.20, 11.0 or higher 10.01, 10.10 and 10.20
HP-UX Releases Supporting IUX Servers & Systems 11.0 or higher 10.01, 10.10 and 10.20
Minimum Memory Size for IUX Servers & Systems 64MB 32MB