HP-UX 11i June 2004 Release Notes

nPartition (Hard Partition) Systems
New Attention Indicator Behavior
Chapter 4
70
New Attention Indicator Behavior
updated for
September 2001
The fruled command and Partition Manager now blink the attention indicators (LEDs)
on HP Superdome cells and I/O chassis rather than illuminating them in a steady-on
state, as was the case with the original 11i v1 release.
Likewise, on HP rp7410 and rp8400 servers, the fruled command and Partition
Manager behaviors are to blink cell attention indicators. (HP rp7410 and rp8400 servers
do not provide user-controllable I/O chassis or cabinet-level attention indicators.)
In addition, the SAM (/usr/sbin/sam) and Partition Manager utilities now blink PCI
slot attention LEDs for procedures that involve locating PCI slots. Both HP Superdome
and HP rp8400 servers support this PCI slot attention indicator usage.
For example, the fruled -o -c2 command now causes cell 2’s attention indicator to
blink. On HP Superdome servers, the fruled -o -i0/1/3 command blinks the
attention indicator for cabinet 0, I/O bay 1, chassis 3.
The /usr/bin/rad command still provides the same functionality for managing PCI
card slot attention indicators. You should use the rad -f attention
#-#-#-# command
to blink the attention LED when locating the specified slot (
#-#-#-# ). See rad (1M) for
options.
Benefits
These changes conform to the PCI Hot-Plug specifications for attention indicator states
and meanings, as detailed in the following table:
Impact
These changes affect all current HP hard-partitionable servers and will be implemented
for all future HP hard-partitionable servers, as well. (Note that only Superdome servers
were supported by HP-UX releases with the old behavior.)
Table 4-3 Attention Indicator (LED) States and Meanings
Attention LED
State
Meaning
OFF Normal; not selected, normal operation.
ON Attention; operational problem.
Supported for PCI card slot LEDs only.
Service is required; problems have been identified with the
component.
BLINKING Locate; user requested to locate hardware.
User has selected the hardware for use in a service operation.