HP-UX 11i June 2003 Release Notes

HP-UX 11i Version 1 Release Overview
The HP-UX 11i Operating Environments (OEs)
Chapter 3
47
The HP-UX 11i Operating Environments (OEs)
new at 11i original
release
Beginning with HP-UX 11i version 1, the operating system is delivered as part of an
HP-UX Operating Environment (OE), an integrated and tested software solution
containing the operating system and selected applications.
The following software bundles are always delivered with an Operating Environment.
Thus, if you do a minimum install, these bundles, plus the HP-UX applications within
each OE, will be loaded:
• HPUXBase32 or HPUXBase64, which consist of operating system commands and
libraries bundled for either 32- or 64-bit systems.
• HPUXBaseAux, which includes system manageability software such as Software
Distributor (SD) and the Partition Manager (parmgr). This additional required core
software is also referred to as the Auxiliary OS.
• The Hardware Enablement Patch Bundle (HWEnable11i), which enables the latest
hardware on HP-UX 11i. Only a few patches are added at each quarterly release to
minimize the number of patches needed to support new systems and I/O devices.
• The Feature Enablement Bundle (FEATURE11-11), which contains additional
software and patches to enable installed HP-UX 11i software and functionality.
• BUNDLE11i contains required OS patches, and is installed by default.
• Network and I/O drivers that are required by the operating system and other
selectable drivers. The default drivers include the following:
— FibrChanl-00: drivers for the PCI Fibre Channel HB adapter (64-bit OS)
— RAID-00: driver for the PCI RAID 4Si controller (64-bit OS)
— FDDI-00: FDDI drivers
— GigEther-00: 1000Base-T/SX (Gigabit Ethernet) drivers for cards A4924A,
A4925A, A4926A, and A4929A
— GigEther-01: driver for A6794A on HP server rp7410 and for add-in cards
A6825A and A6847A (64-bit only)
— IEther-00: driver for A6974A card
*
(For further information, see “Always-Installed Network Drivers” on page 101. Also
see “Selectable Network Drivers” on page 157 in for a list of the selectable drivers.)
• OnlineDiag, installed by default, which provides the HP-UX 11i Diagnostics
(Support Tools) that include STM, ODE, and EMS hardware monitors.
• CDE-English: CDE language (such as for English or alternate languages).
Operating Environments for HP Commercial Servers
The following lists each 11i Operating Environment available for HP servers. These
Operating Environments are supported on all HP servers, including technical servers.
They are not supported on technical workstations.
*. Although HP has decided not to release the A6974A adapter card, the IETHER-00
driver software will remain in 11i to support future cards.