HP-UX 11i June 2002 Release Notes
Workstation/Server Specific Information
SCSI Driver c8xx
Chapter 5
66
SCSI Driver c8xx
new for
March 2002
The c8xx driver is being updated to support two new SCSI PCI Ultra160 Host Bus
Adapters (HBAs) that are available beginning in March 2002. The driver is included in
the March 2002 HWEnable11i bundle, which is available on the March 2002 11i OE
media and on the Support Plus CD.
Four patches (PHKL_25712, PHCO_25831, PHKL_24854, and PHKL_25218) are required for
the c8xx driver. Note that all four patches are included in the HWEnable11i bundle. So, if
you install the entire bundle, you will automatically install the four patches.
For the most recent information about the SCSI HBAs, you should periodically check the
SCSI HBA information at the HP IT Resource Center (ITRC), at http://itrc.hp.com.
Go to the area for knowledge trees. Then, under “Hardware,” select “Networks,” then
“mass storage connectivity,” then “scsi hba’s,” and then “technical support.” This takes
you to a page titled “scsi hba’s.” (You might want to bookmark this page for future
reference.)
Table 5-5 HBAs Supported by c8xx SCSI Driver for HP-UX 11i
SCSI HBA Bus Type Technology Supported HP-UX Systems
A6828A
(single channel)
PCI Ultra160 LVD/SE
SCSI-3
A400, A500, and L- and N-Class, rp24xx,
rp54xx, rp7400, rp7410, rp8400, and
Superdome
a
servers
A6829A
(dual channel)
PCI Ultra160 LVD/SE
SCSI-3
A400, A500, and L- and N-Class, rp24xx,
rp54xx, rp7400, rp7410, rp8400, and
Superdome
a
servers
a. NOTE: Check the HP IT Resource Center (ITRC) periodically for the availability of OLAR support
on Superdome servers. Information for accessing the ITRC is given below.