HP-UX 11i June 2002 Release Notes
I/0 and Networking Cards
Network Drivers
Chapter 7
142
4. As described in steps a, b, and c below, merge every LAN interface (as shown to be
configured in Step 2) into the file hpbtlanconf in the
/var/adm/sw/save_custom/UNIFIED_MER directory.
a. First, note that a set of three parameters is required for each LAN interface:
• HP_BTLAN_INTERFACE_NAME,
• HP_BTLAN_STATION_ADDRESS and
• HP_BTLAN_SPEED.
b. Second, note that the index value used for the set of three parameters should be
unique for each interface. For example:
HP_BTLAN_INTERFACE_NAME[0]=lan1
HP_BTLAN_STATION_ADDRESS[0]=0x080009C4686E
HP_BTLAN_SPEED[0]=100HD
HP_BTLAN_INTERFACE_NAME[1]=lan2
HP_BTLAN_STATION_ADDRESS[1]=0x080009C4B23C
HP_BTLAN_SPEED[1]=FULL
c. Finally, merge all LAN interfaces by creating a set of three parameters with a
unique index for each:
• Copy the value of the interface name into the parameter
HP_BTLAN_INTERFACE_NAME.
• Copy the value of the station address into the parameter
HP_BTLAN_STATION_ADDRESS.
• If the SPEED parameter exists, and if its value (lowercase or uppercase) is
100FD or 100HD, 10FD or 10HD or auto_on, copy the value into the
HP_BTLAN_SPEED parameter.
However, if the SPEED parameter does not exist, and the DUPLEX parameter
has been set and its value (lowercase or uppercase) is FULL or HALF, copy
the value to HP_BTLAN_SPEED parameter.
If neither the SPEED nor DUPLEX parameter values have not been set, do not
put any value for the HP_BTLAN_SPEED parameter.
5. If the hpbtlanconf configuration file already exists (as
/etc/rc.config.d/hpbtlanconf), copy it to
/etc/rc.config.d/hplanconf.obsolete.
6. Move the file hpbtlanconf.merge to hpbtlanconf by using the command
mv -f /etc/rc.config.d/hpbtlanconf.merge
/etc/rc.config.d/hpbtlanconf
7. Restart the update process. Answer NO (N) at the prompt, Do you want to proceed
in merging the configuration file into one? [Y|N].
HSC and PCI 1000Base-SX/T (Gigabit Ethernet)
updated for
June 2002
The June 2002 release of the igelan driver (available on software bundle GigEther-01)
supports PCI 1000Base-T (A6825A) and PCI 1000Base-SX (A6847A), and continues to
support 1000Base-T/SCSI (A6794A) on the HP server rp7410, for HP-UX 11i, 64-bit only.