HP-UX 11i June 2001 Release Notes

Installation
Ignite-UX Changes (updated for June 2001)
Chapter 6126
Ignite-UX Changes (updated for June 2001)
Ignite-UX Version B.3.3
Ignite-UX (IUX) Version B.3.3 is an HP-UX administration toolset to
help you install and configure or recover HP-UX systems.
The complete Ignite-UX product, with support for HP-UX 11i, 11.0 and
10.20, is available on the first CD of the 11i OE media kit.
NOTE Ignite-UX will not be installed by default when updating the entire
operating system from 10.20 or 11.00 to 11i even if the system currently
is an Ignite-UX server.
Updating your Ignite-UX server to 11i and Ignite -UX version B.3.3 or
newer will ensure that you have the latest version of
make_net_recovery and make_tape_recovery. make_net_recovery
has added most of the command line options that used to only be in
make_recovery. make_tape_recovery is the replacement for
make_recovery and allows you to control tape creation on a client
system from your Ignite-UX server. For details on updating an Ignite-UX
server, see Chapter 3 of the HP-UX 11i Installation and Update Guide.
If you are cold installing a system, you can select Ignite-UX from the
software selection screen to be installed at the same time the rest of the
OS is installed.
By default, running Ignite-UX will install the core HP-UX 11i files,
networking drivers, and the OE. You can deselect the OE but you cannot
install an OE subset using Ignite-UX. Also some of the networking
drivers are not deselectable.
Impact
Ignite-UX, Version B, no longer supports the installation of 10.01 and
10.10 machines for 11i. The B Version will continue to support 10.20 and
later operating system revisions. In addition, Version B will only operate
on HP-UX machines that have at least 64MB of RAM. Previously, HP-UX
machines that had at least 32MB of RAM were supported. Version A is