HP-UX 11i Installation and Update Guide, March 2003

Install/Update System Requirements
System Requirements
Chapter 346
For the latest list of supported systems, see the “what systems are
supported” question on this web site:
http://devresource.hp.com/STK/hpux_faq.html#C1
How to Identify Your System’s Model, OS and Software
The following topics will show how to obtain your current system
information:
Identify model To determine the model number of your system, enter:
model
Verify that HP-UX 11i is supported on your system (see Table 3-1,
“Supported Systems,” on page 44).
Identify OS and OE To identify the OS version that your system is currently running, enter:
uname -r
To update to HP-UX 11i, your system must be currently running either
B.10.20 or B.11.00. After cold-installing or updating to HP-UX 11i,
you’ll notice that uname identifies the HP-UX 11i release as B.11.11.
When a system has HP-UX 11i installed, you can determine which
revision of HP-UX 11i is installed by entering the following command:
/usr/sbin/swlist -l bundle
The HWEnable11i and HPUXBaseAux bundles indicate the current
installed revision level. The revision level is indicated both in the bundle
version number (for example, B.11.11.0209) and the description text
(for example, Hardware Enablement Patches for HP-UX 11i, March
2003).
To identify the Operating Environment currently installed on your
system, use swlist. For example:
V22xx, V2500, V2600 X
Table 3-1 Supported Systems (Continued)
Bezel or Model 32-bit 64-bit