HP-UX 11i December 2004 Release Notes

Table Of Contents
Workstation/Server Specific Information
Hardware Enablement
Chapter 5
88
New FibrChanl-01 driver is only available at http://software.hp.com (search
for A6826A)
A7109A GigE LAN Core I/O card for rp8400 server
Requires updated GigEther-01 driver from 11i OE for June 2003.
A7143A 4-Port Ultra-160 RAID adapter
New RAID-01 driver is only available at http://software.hp.com (search for
A7143A)
A9782A PCI Fibre-Channel and GigEthernet Combo adapter
Requires updated GigEther-01 driver and new FibrChanl-01 driver.
updated for March
2003
Improved IDE/ATAPI driver for workstation optical devices (CD-ROM, CD-RW, and
DVD-ROM units).
Improved support of A5159A (FWD SCSI) and A5838A (Combo SCSI/LAN) adapters.
Provided MirrorDisk/UX fix for the hot-pluggable disks on rp8400 and rp7410
servers.
Added support for multiple USB hubs.
Added support for 8GB high-density SyncDRAM memory module (uses 4 SIMM
slots) for rp7410 and rp8400 servers.
Added support for Ultrium 460 and SDLT 160/320 tape drives (in HP StorageWorks
Tape Libraries).
Updated diagnostics to recognize EVA FC disk array.
Updated diagnostics to support new 36/72/144 GB FC disk drives.
Added diagnostics to support the iSCSI decoder/monitor.
Updated required patches that support latest GSP firmware update on HP servers.
Note these other dependencies for the rp7400, rp54xx, L-Class with A6696B GSP
cards, and rp24xx products:
Install PHNE_26326 and PHCO_27243 (or superseding patches) before system
is updated with the GSP Firmware Revision B.02.11 or C.02.05 or later.
HWEnable11i bundle for March 2003 provides PHNE_27760 (Cumulative Mux
and Pty Patch) and PHCO_28169 (mkst (1M) cumulative patch), which
supersede PHNE_26326 and PHCO_27243.
updated for
December 2002
SMART support has been added for new and legacy HDD drives.
The existing Firmware Update tool in Support Tools Manager (STM) was enhanced.
Added reset_recovery feature for A7789A Graphics Card used in newer
workstations.
Verified HP-UX support for the following workstations with 875MHz PA8700+
processors (no HP-UX software changes were required for these models in December
2002):
A9636A Visualize C3750 workstation
A9638A Visualize J6750 workstation