HP-UX 11i December 2002 Release Notes

I/0 and Networking Cards
Network Drivers
Chapter 7
159
A5856A PCI RAID 4Si controller iop_drv
A6684A HSC Tachlite Fibre Channel card td
fcp
fcparray
A6685A HSC Tachlite Fibre Channel card td
fcp
fcparray
A6794A 1000Base-T/SCSI card for rp7410 server igelan
A6795A PCI Tachyon XL2 Fibre Channel card fcT1
fcp fcT1_cntl
td
fcparray
A6825A PCI 1000/Base-T (gigabit over copper) card igelan
A6847A PCI 1000/Base-SX (gigabit over fiber) card igelan
A6974A PCI 10/100Base-TX iether
B5509BA PCI 10/100Base-TX card for workstations btlan
(btlan5 for 10.20/11.0)
J3514A opt
#001
HSC 10/100Base-TX 2-port for K-Class and
T600 servers
btlan
(btlan4 for 10.20/11.0)
J3514A opt
#002
HSC 10/100Base-FX (fiber) 2-port for K-Class
and T600 servers
btlan
(btlan4 for 10.20/11.0)
J3515A HSC 10/100Base-TX 1-port for C, J
workstations and A, D, R-Class servers
(except D200)
btlan
(btlan4 for 10.20/11.0)
J3516A
opt #001
HSC 10/100Base-TX 2-port for C, J
workstations and A, D, R-Class servers
(except D200)
btlan
(btlan4 for 10.20/11.0)
J3516A
opt #002
HSC 10/100Base-FX (fiber) 2-port for C, J
workstations and A, D, R-class servers
(except D200)
btlan
(btlan4 for 10.20/11.0)
J3850A HSC 10/100Base-TX card for T-Class server btlan
(btlan4 for 10.20/11.0)
a. The HWEnable11i bundle, which is normally installed by default on the 11i OE
media, provides the patches that are required for the installation of these I/O
bundles. When updating an existing 11i system, one can install the
HWEnable11i bundle and the desired I/O bundle from the OE media in the
same install session to meet software dependencies.
Table 7-1 Always-Installed Networking, I/O, and Mass Storage
Card Drivers
ab
(Continued)
Card
Number
Description Driver