HP System Management Homepage Installation Guide, May 2005

i. Enter 2.
ii. Enter the number associated with the IP address or IP address range to be
deleted and press Enter. The IP address or IP address range is deleted from
the Inclusion List.
d. Enter n for next.
●
Enter 2 to disable IP Restricted Logins, which sets it to OFF. IP Restricted Logins:
OFF is displayed.
To disable IP Restricted Logins:
• Enter 2 to disable the IP Restricted Logins. The IP Restricted Logins is set to OFF.
To add an IP address or IP address range to the Exclusion List:
a. Enter 1 to add an IP address to the Exclusion List.
b. Enter the IP address or IP address range to be added to the Exclusion List. The IP
address or IP address range is added in the IP Address Exclusion List.
c. Enter n for next.
Note: You can add or delete as many IP addresses or IP address ranges as you want.
To delete an IP address or IP address range from the Exclusion List:
1. Enter 2 to delete an IP address from the Exclusion List.
2. Enter the number associated with the IP address or IP address range to be deleted.
Press Enter. The IP address is deleted from the IP Address Exclusion List.
10. Enter n to go to the next screen. The configuration completes, and a message is displayed
indicating the System Management Homepage is successfully set up. The System Management
Homepage service is stopped and started automatically.
11. Verify the System Management Homepage is configured and working properly by navigating
to it and verifying that it displays correctly.
40
Installing In-Place on Linux