HP System Management Homepage Installation Guide, May 2005

4. Press Enter when you are finished deleting certificate files.

❍

2 - Trust by Name

1. Enter 2 to Trust by Name. Trust Mode: Trust by Name is displayed.

2. Enter 4 to Modify Server Name list.

To add an HP Systems Insight Manager server name:

a. Enter 1. You are prompted to add an HP Systems Insight Manager server.

b. Enter the name of the HP Systems Insight Manager server to be trusted and

press Enter. The server name is displayed in the Trusted Server Names list.

Note: You can add as many servers as you want.

To delete a server name:

i. From the Server Name list, enter 2.

ii. Enter the number associated with the name of the server to be deleted.

The server name is removed from the Server Name list.

c. Enter n for next. The IP Binding screen is displayed.

❍

3 - Trust All

1. Enter 3 to Trust All. Trust Mode: Trust All is displayed.

2. Press Enter.

3. Enter n for next. The IP Binding screen is displayed.

8. The IP Binding screen enables you bind IP addresses that match a subnet and netmask.

The following options are available:

●

1 - Enable IP Binding

1. Enter 1 to enable the IP Binding, which sets it to ON. IP Binding: ON is displayed.

2. Enter n to go to the next screen.

The following options are available:

❍

1 - Add

To add an IP address:

1. Enter 1 to add an IP address. You are prompted for the IP address.

Installing In-Place on Linux