HP System Management Homepage Installation Guide, December 2006
perl /usr/local/hp/hpSMHSetup.pl
The Welcome screen appears, indicating that you can configure security and access parameters on
the following screens.
2. The Welcome screen indicates that you can configure security and access parameters on the following
screens.
Press Enter. The Operating System Groups screen appears.
3. The Operating System Groups screen enables you to add operating system groups to HP SMH.
Add or delete operating system groups in HP SMH. The following options are available:
a. To add groups:
i. At the prompt, enter 1 to add a group. The Add Operating System Groups screen displays
the operating system group lists.
Note: You can add up to five entries per group.
Enter one of the following options to assign the operating system group to the Administrator
Group List:
• Enter 1 for Administrator.
For example, to add admin1 to the Administrator operating system group:
A. Enter 1 for Administrator.
B. At the prompt, Enter the name of the operating system group:, enter
admin1.
C. Press Enter. admin1 appears in the Administrator Group List.
D. Enter n to go to the next screen.
• Enter 2 for Operator.
• Enter 3 for User.
ii. Enter n to go to the next screen.
b. To delete a group:
i. Enter 2 to delete a group.
The following options are available:
• Enter 1 for Administrator. The Administrator Group List appears.
• Enter 2 for Operator. The Operator Group List appears.
• Enter 3 for User. The User Group List appears.
ii. At the prompt, enter 1, 2, or 3.
iii. Enter the number next to the group name to be deleted. The group is deleted from the group
list.
Note: You can delete as many groups as you want by repeating this step.
iv. Press Enter when you are finished deleting to go to the next screen.
v. Enter n to go to the next screen. The Operating System Groups screen appears.
vi. Enter n to go to the next screen. The User Access screen appears.
4. Configure Local and Anonymous Access. The following options are available:
• Enter 1 to enable Anonymous Access.
Caution: HP does not recommend the use of anonymous access.
• Enter 2 to disable Anonymous Access.
• Enter 3 to disable Local Access.
34 Installing in-place on Linux