HP System Management Homepage Installation Guide, December 2005

ii. Press Enter.
iii. Enter n for next. The IP Binding screen is displayed.
8. The IP Binding screen enables you to bind IP addresses that match a subnet and netmask.
The following options are available:
a. Enable IP Binding
i. Enter 1 to enable the IP Binding, which sets it to ON. IP Binding: ON is displayed.
ii. Enter n to go to the next screen.
The following options are available:
To add an IP address:
A. Enter 1 to add an IP address. You are prompted for the IP address.
B. Enter the IP address to be added. IP Address: YourIPAddress is displayed.
You are prompted for the netmask.
C. Enter the netmask. netmask: YourNetmask is displayed.
Note: You can add or delete as many IP addresses as you want.
To delete an IP address:
A. Enter 2.
B. Enter the number of the IP address or netmask to be deleted. The IP address or netmask
is removed from the IP address or netmask list.
iii. Enter n to go to the next screen. The IP Restricted Logins screen is displayed.
b. Disable IP Binding
i. Enter 2 to disable the IP Binding, which sets it to OFF. IP Binding: OFF is displayed.
ii. Enter n to go to the next screen or enter p to go to the previous screen. The IP Restricted
Logins screen is displayed.
Configuring HP SMH 35