HP Instant Support Enterprise Edition Client Installation and Upgrade Guide

Installing ISEE on OpenVMS Clients
Installing ISEE OpenVMS Clients in the Shared Server Model
Appendix D
99
11. Press [Enter] on your keyboard to continue.
12. Press [Enter].
13. Enter E to exit back to the configuration menu, and press the [Enter] on your
keyboard.
14. Enter 3 to start ISEE on this node, and press [Enter] on your keyboard.
15. Press [Enter] on your keyboard to continue.
16. Enter 2 to list the server, and press the [Enter] on your keyboard.
17. Verify that the system you designated to run the ISEE processes shows
enabled;running, and press [Enter] on your keyboard to continue and enter E
to exit the configuration menu.
Configuring Additional Servers
1. From each system that will be enabled to run the ISEE processes, run the following
command:
$ @ISEE$HPSERVICES:ISEE$INIT.COM
2. Enter 1 to select the Server(s) option, and press the [Enter] on your keyboard.
Figure D-11 ISEE Configuration Utility Menu
3. Enter 1 to select Add Server to add the current node as a server, and press the
[Enter] on your keyboard.
Figure D-12 ISEE Configuration Utility Menu
4. Enter Yes to continue and press [Enter].