HP Instant Support Enterprise Edition Client Installation and Upgrade Guide

Installing ISEE on OpenVMS Clients
Installing ISEE OpenVMS Clients in the Stand Alone Model
Appendix D
95
6. Enter Yes to continue and press [Enter]. After the configuration checks have
passed, a new menu will display (see Figure D-5 on page 95). At this point the ISEE
processes are started.
7. Enter 2 to display the ISEE server status, and press the [Enter] on your
keyboard.
Figure D-5 Stand Alone Configuration Utility Menu
8. Verify that the system shows enabled;running (see Figure D-6), and press
[Enter] on your keyboard to continue.
Figure D-6 Stand Alone Configuration Utility Menu: Server Status
9. Enter E to exit the Configuration Menu, and press the [Enter] on your keyboard.
Configuring the ISEE Client Software in the Stand-Alone Server
Model
Complete the appropriate section either “Configuring ISEE after an Individual
Installation” on page 23 or “Completing the ISEE Configuration after using the
Pre-configuration Utility” on page 29 to complete the configuration.