HP Instant Support Enterprise Edition Client Installation and Upgrade Guide

Storage Solutions Support Software for ISEE Clients
Configuring Support for Virtual Array Devices
Appendix G
128
5. Enter your information in the trial/free product registration form and click [Next].
A product receipt is displayed. Please print the receipt.
6. Click [Back] on the browser.
7. Select the link in the download software column of the receipt window and download
the software to a temporary location.
This starts a dialogue to ftp the Client software package to the monitored system.
Use the Save this file to disk option. If required, ftp the downloaded software
package in binary mode to the desired monitored system.
Installing the VA Client Software on an ISEE HP-UX Monitored
Client
1. Download <vaeh_component>.depot to:
/var/tmp.
2. Execute the following command:
swinstall -s /var/tmp/<vaeh_component>.depot VAEH
Where <vaeh_component> is the name of the VAEH software you want to install.
Setting the VA Host Installation Event
This step is only for or HP-UX 11.x Clients hosting VA devices. Execute the following
commands to allow the installation event (verification) to be sent to the HP support
center:
cd /opt/hpservices/contrib/vaeh/bin
sh sendInstallEvent.sh
Configuring Command View SDM 1.07 (or higher) security
If CVSDM 1.07 or higher is installed on the array host, follow these instructions to add
the root user as an Administrator in secadmin. For more details refer to the CVSDM
User Guide.
The array security feature is installed automatically when the Command View SDM
software is installed. After installation, security is enabled. The default username is
Administrator and the default password is administrator (the password is case
sensitive). Security can be configured using the Command View SDM Launcher or by the
secadmin command.
1. Run the security administration utility secadmin.
secadmin -host {host_name}
user: Administrator
password: administrator
secadmin prompt appears
2. Add the root user as an Administrator in secadmin
<secadmin on {host name}>
add -user root -group Administrator -host {host name}