HP Instant Support Enterprise Edition Client Installation and Upgrade Guide

Installing ISEE on OpenVMS Clients
Understanding the Pre-configuration Utility
Appendix D
106
Understanding the Pre-configuration Utility
The ISEE pre-configuration utility is an efficient tool for an Enterprise with multiple
non-clustered (Stand-Alone) OpenVMS servers and is required for the Multi-Server
model. The pre-configuration enables you to supply the same general configuration
information for each of your ISEE monitored clients and eliminates the need to
completely configure multiple clients with the ISEE UI.
With both models, after using the pre-configuration utility you must configure
entitlement information for your ISEE clients in the ISEE UI, but the bulk of the
configuration process is already complete. If you choose to use it, run the configuration
utility before you complete either the Stand-Alone or Multi-Server installations.
NOTE The setupinfo file created by the pre-configuration utility is saved by default to the
other clusters when the directory structure is created. To understand these directory
structures, see Example D-1, Example D-2, and Example D-3 on page 89.
Running the Pre-configuration Utility
1. When prompted with the option to run the Pre-Configuration utility in either the
stand alone or the multi-server models, select the appropriate option.
2. Press [Enter].
3. Enter y to continue.
4. Enter your information as prompted by the utility.
NOTE Reference Table 1-2 on page 18 for the types of information required by the
pre-configuration utility.
5. The pre-configuration utility will exit back to the Configuration Utility.