HP Instant Capacity User's Guide for versions B.07.x

Installing and Uninstalling Instant Capacity Software
Installing Instant Capacity Software
Chapter 3 45
For HP-UX 11i v1 and 11i v2 - Installing from the
HP-UX Media
Follow this procedure to install the Instant Capacity B.07.x software on
your HP-UX 11i v2 system from either the appropriate HP-UX
Applications Software or Operating Environment media:
Step 1. Log in as root.
Step 2. Determine the DVD drive device file by entering the following command:
ioscan -fnC disk
Step 3. Insert the appropriate HP-UX Applications Software or Operating
Environments DVD into the DVD drive.
Step 4. Mount the DVD drive to the desired directory. The following example
uses the /dev/dsk/c1t2d0 device file (from
Step 2, above) and the /dvd
directory. To mount the DVD drive, enter a similar command as:
Mount Example:
mount -r /dev/dsk/c1t2d0 /dvd
Step 5. Install the B.07.x bundle B9073BA from the DVD:
swinstall -s /dvd B9073BA
Step 6. Continue with “For All Installations” on page 46.
For HP-UX 11i v1 and 11i v2 - Installing from the HP
Software Depot
Step 1. Do a search for “B9073BA” at HP’s Software Depot web site:
http://www.hp.com/go/softwaredepot
Step 2. Select the link that appeared as a result of your search, and follow the
instructions on the Installation page.
Step 3. Continue with “For All Installations” on page 46.