HP Instant Capacity User's Guide for versions B.07.x

Special Considerations
Configuring E-Mail on Instant Capacity Systems
Appendix A148
Configuring Instant Capacity’s FROM E-mail Address
One of the e-mail requirements of the Instant Capacity program is that
the FROM e-mail address, on e-mail messages sent by the Instant
Capacity software from your system, must be DNS resolvable.
The Instant Capacity software uses adm@
localhost.domain as the
default FROM e-mail address (where
localhost is the hostname of your
system and
domain is its DNS domain). If the default FROM e-mail
address is undesirable, you can configure the Instant Capacity B.07.x
software to use a FROM address you specify.
Configuring a
Specified FROM
Address
To configure your specified Instant Capacity FROM e-mail address,
execute the following command:
/usr/sbin/icod_modify -f
from_address
You can verify the configured Instant Capacity FROM e-mail address by
using the /usr/sbin/icod_stat command.
After you have configured a specified FROM e-mail address, the Instant
Capacity software uses it on all subsequent e-mail messages sent from
your system.
Reverting to the
Default FROM
Address
If you have specified an Instant Capacity FROM e-mail address and you
want to revert to the default FROM e-mail address
(adm@
localhost . domain ), execute the following command:
/usr/sbin/icod_modify -f ““