HP Instant Capacity Release Notes for versions B.07.x

Major Changes, New Features and Requirements of Instant Capacity B.07.x
Software Requirements
Chapter 222
HP-UX 11i v2 Requirements
For Instant
Capacity Versions
B.07.x on
HP-UX 11i v2
The following software is required for Instant Capacity versions B.07.x
on HP-UX 11i v2:
❏ HP-UX 11i v2 May 2005 update, or later
❏ iCOD software bundle B9073BA (versions B.07.x) — installed
automatically when the HP-UX 11i v2 Operating Environment (OE)
is installed
❏ The kernel configuration must include the diag2 module
❏ WBEM B8465BA bundle (version A.01.05 or higher)
❏ nPartition provider NPar bundle (version B.11.23.01.04 or higher,
available from the OE)
❏ If you have a virtual partitioned environment, the Virtual Partitions
software (bundle T1335BC) must be version A.04.01 or greater
NOTE On HP-UX 11i v2 systems, updated firmware may be required by either
or both of the NPar or Virtual Partitions software, as documented for
these products.
Your Instant Capacity system is ordered and shipped with all of the
above software. In the event your system’s operating system is
reinstalled or installed with Ignite-UX, ensure that the above software
requirements are satisfied.