HP Instant Capacity Release Notes for versions B.07.x

Major Changes, New Features and Requirements of Instant Capacity B.07.x
Software Requirements
Chapter 2 21
Software Requirements
Every HP-UX partition in an Instant Capacity system is required to have
the Instant Capacity software installed and the icodd daemon running.
You must maintain the Instant Capacity software until all program
requirements are fulfilled and the system is no longer considered an
Instant Capacity system.
NOTE For necessary updates, we recommend that you install the latest OEUR
or AR update, if possible. If you must install individual components, you
may run into issues due to mutual corequisite products. For example,
NPar requires a certain version of Instant Capacity and vice versa. To
simultaneously satisfy both prerequisites you must install both bundles
from the same depot (as on an OEUR or AR distribution or from a depot
you create from swcopy).
HP-UX 11i v1 Requirements
For Instant
Capacity Versions
B.07.x on HP-UX
11i v1
The following software is required for Instant Capacity versions B.07.x
on HP-UX 11i v1:
❏ HP-UX 11i v1 September 2005 update, or later
❏ iCOD software bundle B9073BA (versions B.07.x) — installed
automatically when the HP-UX 11i v1 Operating Environment (OE)
is installed
❏ The kernel configuration must include the diag2 module
❏ WBEM B8465BA bundle (version A.02.00 or higher)
❏ nPartition provider NPar bundle (version B.11.11.01.03 or higher,
available from the OE)
❏ If you have a virtual partitioned environment, the Virtual Partitions
software (bundle T1335AC) must be version A.02.03 or greater