HP EISA/PCI Multiplexer Family Cabling, Diagnostics and Troubleshooting Manual

73
Troubleshooting and Diagnostics
Driver Status Menu Selections
The data monitor screen shows the actual characters as they are being
sent and/or received by the device. This screen displays both
hexadecimal and ASCII data. Press any key and theCaptureData screen
is displayed (see Figure 6-11).
Figure 6-11 Data scope capture data screen
The data can be captured and saved for later review. The default file
name for input data is /tmp/eqnin and the default file name for output
data is
/tmp/ eqnout.
If desired, the data scope can be configured to run
continuously. You can specify whether to view receive data, send data or
both.