HP EISA/PCI Multiplexer Family Cabling, Diagnostics and Troubleshooting Manual

71
Troubleshooting and Diagnostics
Driver Status Menu Selections
Data Scope
Highlight Data Scope and press Return key. The Data Scope setup
screen (see Figure 6-9) is used to establish the parameters identifying
the data selected for display:
• Select the Device Port Name (i.e.
/dev/tty3al
).
• Select the type of monitor you want [INPUT, OUTPUT, FULL
DUPLEX].
• Select the Buffer Full options [Continue, Stop].
• Select the Display Options [Data Only, Show Detail].
• Highlight Start Scope and press Return key to display actual data.
Figure 6-9 Data scope parameter setup screen