HP EISA/PCI Multiplexer Family Cabling, Diagnostics and Troubleshooting Manual

63
Troubleshooting and Diagnostics
Running emux_diag Utility
Running emux_diag Utility
The following conventions are used when running the
emux_diag
utility:
1. Arrow keys are used to move between menus and menu selections.
2. Use the Esc (escape) key to move out of sub-menus.
3. Pressing the Return key selects the highlighted menu item.
4. Pressing the F1 function key displays a context sensitive help.
5. To exit from
emux_diag
, highlight Quit on the main menu and press
Return.
To start the diagnostic utility, type
/usr/bin/emux_diag
on the UNIX prompt
line and press the Return key. The Main Menu is displayed showing the
driver status drop down menu selections. The Main Menu selections are:
Driver Status
Port Status
Diagnostics
Quit