HP EISA/PCI Multiplexer Family Cabling, Diagnostics and Troubleshooting Manual

Install Port Modules, Fan Out Cable & Power Supply

Install the Mux Power Supply

Install the power supply for the Mux port modules (see Figure 3-4) using

the following procedure:

Figure 3-4 EISA/PCI Mux power supply.

Warnin

Risk of electrical shock inside the AC/DC adapter. Do not open.

Refer to service personnel only. Never remove the AC/DC adapter

enclosure

1. Remove the power plug cover protecting the power connector on the

port module (Figure 3-5).

Figure 3-5 Port module power plug cover and LEDs