HP Distributed Print Service Administration Guide

Appendix A 415
NT Interoperability with HPDPS
Setting Up an HPDPS Printer on an NT System
NOTE Be sure to remove the # character from the “printer” line (uncomment
the line) in the /etc/inetd.conf file of the HPDPS server host and add
the name of the NT system to the /var/adm/inetd.sec file.
The entry in /etc/inetd.sec should be:
printer allow # access OK for all hosts
or
printer allow hostname # access OK for this ‘hostname’
or
leave the entry empty, which is the equivalent to printer allow.
9. Under “Name of Printer on that machine:”, enter the HPDPS
logical printer name. Then press the OK button.
10. In the “Printer Setup” dialog box, press OK.
You should now have the HPDPS printer installed on the NT system.