HP Distributed Print Service Administration Guide

374 Chapter12
Using HPDPS Error Logs
How HPDPS Backs Up Server Error Logs
E 07/31/97 10:47:33 [205fdf28 jjones−>Spool1,LogPrt3] 5010-550
Cannot print this job. No physical printers are associated wi
th logical
printer LogPrt3
A 07/31/97 10:47:33 [205fdf28 jjones−>Spool1,LogPrt3] 5010-528
Cannot create job 2 (Spool1:0233600000).
The second message in this sample is preceded by E, for error, rather
than A for audit. Your next step might be to use the pdmsg command to
view the full description of message number 5010-550 along with
suggested actions.
To make it easier to track which commands generate error messages, you
can temporarily or permanently change a server error log log-severity
attribute value to debug. This makes the log record the message that the
server produces when the server starts working on a command. In this
way, you can identify what the server was doing when the error occurred.
It also logs server-to-server requests which can be helpful.
See “Available Values for the log-severity Attribute” earlier in this
chapter for a list and explanation of the supported values for the
log-severity attribute.