HP Distributed Print Service Administration Guide

Chapter 7 217

Using Notiﬁcation

Notiﬁcation Proﬁle Examples by HPDPS Object Type

Discussion:

• The printer events, contained in the

class-physical-printer-configuration, speciﬁed for the

operator fpjones, apply to all of the physical printers in the

supervisor.

• The following events speciﬁed for the administrator, lbjohnson, also

apply to all of the physical printers in the supervisor:

— object-cleaned

— object-deleted

Example 2 The notiﬁcation proﬁle inthe following example can be set when creating

the physical printer with the pdcreate command or with the pdset

command using the -x ﬂag or using an attributes ﬁle with the -X ﬂag.

Assumptions:

• One operator per shift is responsible for managing the physical

printer PhyPrt2 contained in spooler Super2.

• A common mail box has been setup for the operators called OPER.

• Because the PhyPrt2 is a three-shift operational printer, the

operators want to keep a daily log of events. In this way, any operator

can ﬁnd out what occurred on the other shifts.

A notiﬁcation proﬁle to satisfy these conditions could be set using the

command:

pdset -x "notification-profile= \

{event-identifiers=class-physical-printer-attention \

class-printer-configuration class-printer-status \

delivery-method=e-mail \

delivery-address=OPER@walnut.xyz.com}" LogPrt2

Initial-Value-Job Notiﬁcation Proﬁle Example

NOTE You must enter all components and values for an initial-value-job

notiﬁcation proﬁle except for the delivery-method of message.