HP Distributed Print Service Administration Guide

Chapter 7 177
Using Notification
List of Notification event-identifiers
Message : Printer Super1:PhyPrt1 was shut down after job 1 (Spool1:1234567890) started
processing.
printer-state-changed • class-physical-printer-st
atus
• class-state-changed
• Physical
Printer
Description : The printer state changed. Processing continues.
Message : The state of printer Super1:PhyPrt1 changed to paused.
printer-timed-out • class-physical-printer-at
tention
• class-physical-printer-de
fault
• class-warning
• Physical
Printer
• Supervisor
Description : The physical printer did not connect or get a response from the printer device in the time
specified by the printer-timeout-period printer attribute. The printer device is being used by
another application. The physical printer continues its attempts to connect to the printer device. The
printer cannot process jobs until it connects to the device. Check the server error log for additional
information.
Message : Physical printer Super1:PhyPrt1 has timed out.
printer-toner-low • class-job-attention
• class-job-default
• class-physical-printer-at
tention
• class-physical-printer-de
fault
• class-warning
• Job
• Physical
Printer
• Supervisor
Description : The physical printer has a low toner condition.
Message : Physical printer Super1:PhyPrt1 toner low on Spool1:Queue1.
Table 7-1 Description of Event Identifier Values
Event Event Class Objects
Supported