Configuring HP-UX For Peripherals

Chapter 3 65
Configuring Interface Cards
3 Configuring Interface Cards
Configuring an interface card or device adapter may provide new
connectivity to external devices or instruments. For this connectivity to
occur, the interface driver for the card must be present in the kernel.
When the system is booted, HP-UX associates the driver (software
module) with the card (hardware path) to provide communication for the
external device or instrument.
Figure 3-1 Role of Drivers in Configuring Interface Cards and Peripheral
Devices
This chapter gives guidelines and configuration procedures for each type
of HP interface card. If you are configuring an EISA or ISA card, also
consult Appendix A, EISA Board Configuration. If you are configuring a
custom SIO-style driver, consult Appendix C, Major and Minor Numbers.