Configuring HP-UX For Peripherals

Chapter 2 45
Managing PCI Cards with OLAR
How to On-line Replace (OLR) a PCI Card using SAM
On-Line” menu item.
Step 13. Replace the target card. The exact procedure for doing this will depend
on what system class you have. Please refer to the hardware manual for
your system for detailed information.
Step 14. At this point, the amber LED should still be activated, and the green
power LED should still be off.
Return to the console, and click the “OK” button on the Replace Card
dialog.
Step 15. Once you click “OK”, SAM first resets the attention LED to it’s normal
state.
Step 16. SAM completes the operation by reversing the sequence of actions. That
is, SAM will:
a. return power to the card slot
b. resume driver operations to the card
c. run any post-replacement scripts (if exist)