Configuring HP-UX For Peripherals

Appendix A 239
EISA Board Configuration
Configuring E/ISA Boards Using Interactive Mode
area networking
board for use with twisted-pair cabling.
Slot CFG File Contents
0 !HWPC010 HP Series 700 EISA System Board
1 !XYZ1401 XYZ SCSI Controller
2 !XYZ1802 XYZ Networking Board
3 !XYZ1702 XYZ Centronics Interface
4 ** EMPTY **
You can use the comment command to display help or comments provided
by the manufacturer about the board and its switches, the interface
functions and choices.
Correcting a Mistake While Using eisa_config
If you have made changes in the configuration that you want to undo,
you can return to the current session's initial configuration by using the
init command.
Type the following command:
[init [system.sci ]]
If you specifysystem.sci, eisa_config retrieves the configuration from
that file; otherwise, it retrieves it from non-volatile memory (NVM).
Displaying Board Information
Type a show command to ask for information on the board in slot 2.
eisa_config displays the board's basic attributes and indicates the
currently selected choice for each function.
EISA: show board 2
XYZ Networking Board
CFG file: !XYZ1802.CFG
Slot 2
The XYZ Networking board is an IEEE 802.3 local area
networking board for
use with twisted-pair cabling.
Manufacturer ................. XYZ Computer Corp.
ID ........................... XYZ1802
Board type ................... NET (Network Board)
Board slot type .............. ISA 8 Bit
Readable ID .................. No