Configuring HP-UX For Peripherals

Appendix A 235
EISA Board Configuration
E/ISA Boards and CFG Files
BOARD
ID = "HWP0C80"
NAME = "HP EISA SCSI host adapter 25525A"
MFR = "Hewlett-Packard Co."
...
IOCHECK = INVALID
DISABLE = SUPPORTED
COMMENTS = " This init file performs the following
- Sets the ABRT to 1 in 0zC85.
- Sets the RIEN to 0 in 0zC85.
...
FUNCTION = "BOOT ROM ENABLE/RELOCATION"
CHOICE = "ENABLED"
LINK
MEMORY = 32K
ADDRESS = 0D8000h | 0C8000h | 0D0000h
MEMTYPE = OTH
WRITABLE = NO
...
INIT = IOPORT(6)LOC(7-6) 00 | 10 | 01
CHOICE = "DISABLED"
FREE
INIT = IOPORT(6)LOC(7-6) 11
FUNCTION = "Host Adapter SCSI ID Selection"
CHOICE = "SCSI ID = 7"
FREE
INIT = IOPORT(7) 10000000
CHOICE = "SCSI ID = 6"
FREE
INIT = IOPORT(7) 01000000
If the default function must be changed, refer to “Changing Choices for
Board Functions” later in this appendix for selecting a board function.
/sbin/eisa_config writes its configuration to non-volatile memory
(NVM) and to a system.sci file, which can be used to create identical
configurations. For the procedure, see “Creating Identical E/ISA
Configurations on Other Workstations”, later in this appendix.