Configuring HP-UX For Peripherals

Chapter 7 185
Configuring Tape Drives
Selecting Device Drivers for a Tape Device and Interface
configuration requirements for the single-ended SCSI tape drives.
Table 7-1 SCSI Tape Drive Configuration Requirements
Architectu
re
Interface
Card
Interface
and Device
Drivers Default Device Special Files
Series 700
Core I/O
a
(internal)
stape
b
/dev/rmt/c#t#d#BEST[b|n|
nb]
c
/dev/rmt/c#t#d#[f#|i#][b
|n|nb]
d
/dev/rmt/#m[b|n|nb]
e
Series 700
EISA
a
25525A/B
stape
b
(same as above)
Series 800
CIO
a
27147A
scsi2
f
tape2
g
(same as above)
Series 800
HP-PB
h
28655A
scsi1
i
tape2
g
(same as above)
a. The following tape drives are supported for HP-UX on a single-ended
SCSI interface: (7980S/SX), A2311A, A2656A, A2944A, A2944A,
A3024A, (C1502A), C1503A/B/C, C1504A/B/C, (C1512A),
C1520A/B, C1521B, C1530B, C1533A, C1534A, C1535A, C1553A,
C2292A, C2297T/U, C2298A, (C2463F/R), C2464F/R, C2465R,
C2466F/R, C2467F/R, C2477F/R/S/U, C2478U, C2954A. (Obsolete
models are shown in parenthesis for reference only.)
b. Specifying stape causes sctl, c700, wsio, and core drivers to be
included automatically in the kernel.