Configuring HP-UX For Peripherals

142 Chapter5
Configuring Disk Drives, Disk Arrays, and CD-ROM Drives
Selecting Device Drivers for a Disk Device and Interface
the disk (7) manpage.)
Table 5-1 SCSI-II Disk Configuration Requirements
Architecture
(SCSI-II Type)
Interface
Card
Interface
and Device
Drivers Default Device File
Series 700 Core
I/O
(Single-Ended)
a
(internal)
sdisk
b
/dev/[r]disk/c#t#
d#[s#]
Series 700 EISA
(Fast/Narrow/Diff
erential)
c
25525B eisa
sdisk
b
(same as above)
Series 700 Models
735, 755
d
(Fast/Wide/Differ
ential)
(internal)
sdisk
b
(same as above)
Series 800 CIO
Single-Ended)
e
27147A
scsi2
f
disc3
g
(same as above)
Series 800 HP-PB
Single-Ended)
h
28655A scsi1
disc3
g
(same as above)
Series 800 HP-PB
(Fast/Wide/Differ
ential)
i
25525B scsi3
disc3
g
(same as above)
a. The following disk devices can be configured to a Series 700
Single-Ended SCSI-II interface: (A1999A), (A2655A), 2657A,
C2214B, C2216T, C2217C, (C2291A), C2293A/T/U, C2295B,
C2473T, C2963A, C2964A, C3020T, C3021T, C3023T, C3024T,
C3027TU, C3028U, A3182A. (Models shown in parenthesis are
obsolete and are listed for reference only.)
b. Specifying sdisk causes sctl, c700, and c720 to be included
automatically in the kernel.