Configuring HP-UX For Peripherals

106 Chapter4
Configuring Terminals and Modems
Selecting Device Drivers for Terminals and Modems
d. mux# and tty#p# derive from ioscan output: The numeral after mux and
tty is the card instance for the tty class of interface card to which the
terminal is connected; the numeral after p is the port number of the serial
interface.
e. Specifying mux0 causes cio_ca0, sio, pfail, and pa to be included in
the kernel.
f. The A1703-60022 and 28639-60001 personality cards are used for console
connection.
g. Specifying mux2 causes sio, pfail, and pa to be included in the kernel.
h. J2092A and J2096A do not support modems.
i. Hard ware flow control is supported on the A1703-60022 for the first eight
(of 16) ports only.
j. Personality card used for console and remote console connection.
k. Specifying mux4 causes lanmux0, lantty0, sio, pfail, and pa to be
included in the kernel.