HP-UX Security Containment B.11.23.01 Release Notes

Compatibility Information and Installation Requirements

Chapter 112

independent software unit, you must reconfigure HP-UX RBAC before you can

use it with the fine-grained privileges and compartments components of HP-UX

11i Security Containment.

Use the following command to reconfigure HP-UX RBAC:

# swconfig -x reconfigure=true RBAC

To download the HP-UX 11i Security Containment bundle from Software Depot, follow these

steps:

Step 1. Go to HP Software Depot at http://software.hp.com.

Step 2. Search for HP-UX Security Containment. Read the product information Web page

for the latest updates and release information.

Step 3. Click Receive for Free>>.

Step 4. Choose the correct version of HP-UX 11i Security Containment for your system.

Step 5. Enter your registration information. Read and accept the Terms and Conditions

and the Software License Agreement.

Step 6. Click Download. Save the HP-UX 11i Security Containment bundle, as a local file

on your system. For example:

/tmp/<security_containment_depot_name>.depot

NOTE The name of the HP-UX 11i Security Containment bundle may

change. Check Software Depot for the correct bundle name.

Step 7. Verify that the depot file is saved on your system by using the following command:

# swlist -d @ /tmp/<security_containment_depot_name>.depot

To install HP-UX 11i Security Containment, follow these steps:

Step 1. Be sure your system meets all requirements, as described in “Compatibility

Information and Installation Requirements” on page 11.

Step 2. Download the HP-UX 11i Security Containment bundle from Software Depot as

described in the previous procedure.

Step 3. Log in to your system as the root user.

Step 4. Install HP-UX 11i Security Containment by using the following command: