HP-UX 11i Security Containment Administrator's Guide for HP-UX 11i v2

Installing HP-UX Role-Based Access Control
The following procedure describes how to install only HP-UX RBAC from the HP-UX 11i Security
Containment bundle. To download and install HP-UX RBAC as a separate product, refer to the
HP-UX RBAC Version B.11.23.04 Release Notes on http://docs.hp.com. To download and install
the full HP-UX 11i Security Containment feature set, refer to “Installing HP-UX 11i Security
Containment”.
NOTE: If you have installed the full HP-UX 11i Security Containment feature set, you already
have HP-UX RBAC installed.
To install HP-UX RBAC, follow these steps:
1. Be sure your system meets all requirements, as described in “Prerequisites and System
Requirements”.
2. Download the HP-UX 11i Security Containment bundle from Software Depot, as described
in “Installing HP-UX 11i Security Containment”.
3. Log in to your system as the root user.
4. Install HP-UX RBAC by using the following command:
# swinstall -x autoreboot=true -s
/tmp/<security_containment_bundle>.depot RBAC
5. Go on to “Verifying the HP-UX Role-Based Access Control Installation”.
NOTE: If you install HP-UX RBAC version B.11.23.02 on a system with version B.11.23.01
already installed, and you have modified the database files, the new version does not overwrite
the database files.
Verifying the HP-UX Role-Based Access Control Installation
Verify the installation of HP-UX RBAC with the following steps:
1. Run the swverify command to ensure that the bundle installed correctly:
# swverify RBAC
If the installation is successful, many files are displayed and a success message appears after
the verification is complete.
2. Run the swlist command to verify that all parts of HP-UX RBAC are configured correctly
on your system:
# swlist -a state -l fileset RBAC
If the product is configured correctly, each fileset is displayed as configured.
Installing HP-UX Standard Mode Security Extensions
The following procedure describes how to install only HP-UX Standard Mode Security Extensions
(SMSE) from the HP-UX 11i Security Containment bundle. To download and install HP-UX
SMSE as a separate product, refer to the HP-UX Standard Mode Security Extensions B.11.23.02
Release Notes (part number 5991–8711) on http://docs.hp.com. To install the full HP-UX 11i Security
Containment feature set, refer to “Installing HP-UX 11i Security Containment”.
NOTE: If you have installed the full HP-UX 11i Security Containment feature set, you already
have HP-UX SMSE installed.
To install HP-UX Standard Mode Security Extensions, follow these steps:
Installing HP-UX Role-Based Access Control 23