HP-UX Role-Based Access Control B.11.23.03 Release Notes

HP-UX Role-Based Access Control B.11.23.03

Installing HP-UX RBAC

Chapter 11

Installing HP-UX RBAC

IMPORTANT Installing HP-UX RBAC B.11.23.03 on a system with previous versions of

HP-UX RBAC already installed on it will overwrite the existing HP-UX RBAC

database ﬁles only if the database ﬁles have not been modiﬁed.

If you installed previous versions of HP-UX RBAC and modiﬁed the database

ﬁles, installing HP-UX RBAC B.11.23.03 on that same system does not

overwrite the existing HP-UX RBAC database ﬁles.

Use the following steps to install HP-UX RBAC on your HP-UX 11iv2 systems:

Step 1. Review the “Compatibility Information and Installation Requirements” on page 9.

Step 2. Download HP-UX RBAC by referring to “Acquiring HP-UX RBAC” on page 10.

Step 3. Logon to your system as the root user.

Step 4. Install HP-UX RBAC using the following command:

# swinstall -s /tmp/<RBAC-depotname>.depot AccessControl

The name and location of the HP-UX RBAC depot above is for example only—the

actual name and location may vary. Also, you do not need to reboot the system to

install HP-UX RBAC.

Step 5. Verify the installation using the swverify AccessControl command. If HP-UX

RBAC installed correctly on the system, the swverify command will include the following

text in the data it reports:

* Verification succeeded