HP-UX 11i Security Containment Administrator's Guide for HP-UX 11i v2

1. Log in to your system as the root user.
2. Remove HP-UX RBAC by using the following command:
# swremove RBAC
3. Use the swlist command to verify that HP-UX RBAC was removed from the system. The
swlist command will not report HP-UX RBAC if it was removed from the system.
NOTE: You must remove HP-UX 11i Security Containment before you remove HP-UX RBAC
or HP-UX SMSE, or you must remove all components at the same time.
Uninstalling HP-UX Standard Mode Security Extensions
To remove HP-UX Standard Mode Security Extensions from your system, follow these steps:
1. Log in to your system as the root user.
2. Remove HP-UX Standard Mode Security Extensions using the following command:
# swremove TrustedMigration
3. Use the swlist command to verify that HP-UX Standard Mode Security Extensions was
removed from the system. The swlist command will not report HP-UX Standard Mode
Security Extensions if it was removed from the system.
NOTE: You must remove HP-UX 11i Security Containment before you remove HP-UX RBAC
or HP-UX SMSE, or you must remove all components at the same time.
Uninstalling HP-UX Standard Mode Security Extensions 25