HP Easy Tools Administrator's Guide

●

Easy Deploy on page 60—Use this section to capture and deploy images, settings, and

configurations and set administrative passwords.

●

Thank You on page 66

NOTE: If either HPCA or HPDM is active on the network, changes in settings made through HPCA or

HPDM override local changes made using HP Easy Tools.

If a Write Filter is enabled on the thin client, you will not be able to apply a new configuration until you

disable the Write Filter.

You must be logged on as administrator to use HP Easy Tools, which is automatic with the default

configuration of Windows CE. If changes have been made to the auto-login settings, however, you

must log on as administrator. The default Administrator password is blank.

To access HP Easy Tools:

▲

Click Start > Control Panel, and click the Easy Tools wizard icon.

NOTE: You may click Language in the black bar across the top of the HP Easy Tools screen and

change the language at any time during your session.

If the system language is English, then the only choice is English. If the system language is not English,

then you may choose the system language or English.