Windows Embedded Standard 7 for HP Thin Clients - Administrator Guide

VMware Horizon View
VMware Horizon View is an enterprise-class desktop management solution that streamlines the
management, provisioning, and deployment of virtual desktops. Users securely and easily access
virtual desktops hosted on VMware Infrastructure, terminal servers, blade PCs, or even remote
physical PCs through the VMware View Manager.
To open the VMware Horizon View client:
▲
Click Start > All Programs > VMware > VMware Horizon View Client.
NOTE: Select images might require you to install the VMware Horizon View client before you
can use it. To do this, click Start > All Programs > Run VMware Horizon View Client Setup. Be
sure to commit the write filter cache before restarting the thin client after installation.
HP Remote Graphics Software
HP Remote Graphics Software (RGS) is the collaboration and remote desktop solution for serious
users and their most demanding applications. All applications run natively on the remote computer
and take full advantage of its graphics resources. The desktop of the remote computer is transmitted
over a standard network to a window on a local computer using advanced image compression
technology specifically designed for digital imagery, text, and high frame rate video applications. A
local keyboard and mouse are supported, as well as redirection of most USB devices to provide an
interactive, high-performance experience.
Use the RGS Receiver on WES to access the remote desktop being transmitted by the RGS Sender.
To open the RGS Receiver:
▲
Click Start > All Programs > HP > HP Remote Graphics Software > HP RGS Receiver.
NOTE: Select images might require you to install the RGS Receiver before you can use it. To
do this, click Start > All Programs > Install HP Remote Graphics Receiver. Be sure to commit the
write filter cache before restarting the thin client after installation.
TIP: For more information, go to http://www.hp.com/go/rgs and see the HP Remote Graphics
Software User Guide
.
HP TeemTalk
HP TeemTalk is terminal emulation software that uses the Telnet protocol to support computing on
legacy platforms.
To open HP TeemTalk:
▲
Click Start > All Programs > Hewlett-Packard > HP TeemTalk Emulator > Configure Session.
TIP: For more information, see the HP TeemTalk Terminal Emulator User Manual .
VMware Horizon View 13