HP Easy Tools Administrator's Guide

7. Click Next to advance to Peripherals.
8. Configure the Peripherals:
a. Display
(Required) Set the following parameters:
●
Resolution—Select the monitor resolution.
●
Color depth—Select a specific color depth supported by the monitor and the software.
●
Refresh rate—Select the refresh rate applicable to your display/monitor. LCD
monitors typically support 60 Hz. CRT monitors display better at higher refresh rates, but
that may shorten the life of the monitor and can cause noise.
●
Multi-monitor mode—Select the screen arrangement for multiple monitors (for up to
four monitors).
●
Primary monitor—Select the primary monitor, if more than one monitor will be used.
b. Power Management
Type or select the number of minutes in the Screen saver on field. After this specified
period of inactivity, the screen saver is displayed.
34
Chapter 3 HP Easy Tools for Microsoft
®
Windows
®
Embedded Standard 2009 (WES 2009)
and Windows Embedded Standard 7 (WES 7)