HP Easy Tools Administrator's Guide

Easy Deploy
The Easy Deploy section allows you to carry out the following functions:
●
Capturing an image on page 17
●
Deploying an image on page 19
●
Setting security on page 22
1. Open HP Easy Tools.
2. Click Easy Deploy in the left pane to go to the Easy Deploy section.
Capturing an image
NOTE: You may need a USB mass storage device for this procedure. The USB device capacity must
be larger than the thin client flash in order to capture the entire flash contents. Images larger than 4 GB
cannot be captured to a USB device.
Use this procedure to capture one of the following:
●
Image—The operating system plus all settings and configuration
●
Settings—The basic configuration settings plus additional advanced settings
●
Configuration—The basic configuration settings you can set in Easy Config:
◦
Regional
◦
Management
Easy Deploy
17