Hardware Reference Guide HP t820 Flexible Thin Client

Installing additional memory
The computer comes with double data rate 3 synchronous dynamic random access memory (DDR3-
SDRAM) small outline dual inline memory modules (SODIMMs).
SODIMMs
The memory sockets on the system board can be populated with up to two industry-standard
SODIMMs. These memory sockets are populated with at least one preinstalled SODIMM. To achieve
the maximum memory support, you can populate the system board with up to 16-GB of memory.
DDR3-SDRAM SODIMMs
For proper system operation, the SODIMMs must adhere to the following specifications:
●
industry-standard 204-pin
● unbuffered non-ECC PC3-12800 DDR3-1600 MHz-compliant
● 1.35 volt or 1.5 volt DDR3-SDRAM SODIMMs
●
support CAS latency 11 DDR3 1600 MHz (11-11-11 timing)
●
contain the mandatory Joint Electronic Device Engineering Council (JEDEC) specification
The computer supports the following:
●
512 Mbt, 1 Gb, and 2 Gb non-ECC memory technologies
● single-sided and double-sided SODIMMS
● SODIMMs constructed with x8 and x16 devices; SODIMMs constructed with x4 SDRAM are not
supported
NOTE: The system will not operate properly if you install unsupported SODIMMs.
Installing additional memory 11