HP Easy Tools Administrator's Guide

7. Click Next to advance to Peripherals.

8. Configure the Peripherals:

a. Display

(Required) Set the following parameters:

●

Resolution—Select the monitor resolution.

●

Color depth—Select a specific color depth supported by the monitor and the software.

●

Refresh rate—Select the refresh rate applicable to your display/monitor. LCD

monitors typically support 60 Hz. CRT monitors display better at higher refresh rates, but

that may shorten the life of the monitor and can cause noise.

●

Multi-monitor mode—Select the screen arrangement for multiple monitors (for up to

four monitors).

b. Power Management

Type or select the number of minutes in the Screen saver on field. After this specified

period of inactivity, the screen saver is displayed.

c. Sound

Select Enable to allow sound or clear the check box to keep it switched off.

d. USB Mass Storage

Select Enable to enable USB ports, or leave the check box clear to keep USB ports disabled.

Easy Config