HP ThinPro 5.0 - Administrator Guide

5. Enter the FTP server information in the fields.
6. Click Finish.
Restoring an HP ThinPro configuration using FTP or HTTP
To restore an HP ThinPro configuration using FTP or HTTP:
1. Select Management > ThinState in the Control Panel.
2. Select the HP ThinPro configuration, and then click Next.
3. Select restore a configuration, and then click Next.
4. Select on a remote server, and then click Next.
5. Select either the FTP or HTTP protocol, and then type the server information in the fields.
NOTE: The Username and Password fields are not required if you are using the HTTP
protocol.
6. Click Finish.
Saving an HP ThinPro configuration to a USB flash drive
To save an HP ThinPro configuration to a USB flash drive:
1. Insert a USB flash drive into a USB port on the client.
2. Select Management > ThinState in the Control Panel.
3. Select the HP ThinPro configuration, and then click Next.
4. Select save the configuration, and then click Next.
5. Select on a USB key, and then click Next.
6. Select the USB flash drive.
7. Click Browse.
8. Navigate to the desired location on the USB flash drive and assign a file name to the profile.
9. Click Save.
10. Click Finish.
Restoring an HP ThinPro configuration from a USB flash drive
To restore an HP ThinPro configuration from a USB flash drive:
1. Insert the USB flash drive containing the configuration file into a USB port on the target client.
2. Select Management > ThinState in the Control Panel.
3. Select the HP ThinPro configuration, and then click Next.
4. Select restore a configuration, and then click Next.
5. Select on a USB key, and then click Next.
6. Select the USB key.
7. Click Browse.
HP ThinState 21