HP ThinPro 5.0 - Administrator Guide

Table E-26 root > keyboard (continued)
Registry key Description
root/keyboard/rdp_kb An internal key used to map the model/layout to an RDP
keyboard map. This key should not need to be modified.
root/keyboard/switch Used to set the keyboard shortcut to switch between the first
and second layout, if 'enable2' is set. Valid values are
grp:ctrl_shift_toggle, grp:ctrl_alt_toggle, and
grp:alt_shift_toggle.
root/keyboard/variant The keyboard variant defines slight variations in the layout.
Typically, the wincompat variation is used, as it most closely
matches Windows keyboard layouts.
root/keyboard/variant2 The secondary keyboard variant.
root > logging
This section describes the registry keys, functions, options, and descriptions in the root > logging
folder.
Table E-27 root > logging
Registry key Description
root/logging/general/debug If set to 1, debugging will be enabled on all debug supported
subsystems. This is usually used in conjunction with
'generateDiagnostic.sh' or the System Information Diagnostic
tool to generate a diagnostic bundle with system debug logs
included.
root > mouse
This section describes the registry keys, functions, options, and descriptions in the root > mouse
folder.
Table E-28 root > mouse
Registry key Description
root/mouse/MouseHandedness Whether the mouse is right-handed or left-handed. 0 for
right-handed, 1 for left-handed.
root/mouse/MouseSpeed The acceleration of the mouse pointer. Typically a number
from 0–25 is in the usable range. 0 will completely disable
acceleration, causing the pointer to move at a constant slow,
but measurable pace.
root/mouse/MouseThreshold The number of pixels before acceleration will be enabled. 0
will set the acceleration to a natural curve that gradually
scales acceleration, allowing for both precise and quick
movements.
140 Appendix E Registry keys