HP ThinPro 5.0 - Administrator Guide

Table E-19 root > USB (continued)
Registry key Description
root/USB/Classes/Physical Interface Device/ClassID USB class ID number.
root/USB/Classes/Physical Interface Device/DisplayName USB class name.
root/USB/Classes/Physical Interface Device/State Whether this class is mapped to the remote computer.
root/USB/Classes/Physical Interface Device/Visible Indicates whether the class is shown on the UI, not shown on
the UI, or disabled.
root/USB/Classes/Printer/ClassID USB class ID number.
root/USB/Classes/Printer/DisplayName USB class name.
root/USB/Classes/Printer/State Whether this class is mapped to the remote computer.
root/USB/Classes/Printer/Visible Indicates whether the class is shown on the UI, not shown on
the UI, or disabled.
root/USB/Classes/ShowTab When set to 1, the Classes tab shows in the USB Manager
GUI.
root/USB/Classes/Smart Card/ClassID USB class ID number.
root/USB/Classes/Smart Card/DisplayName USB class name.
root/USB/Classes/Smart Card/State Whether this class is mapped to the remote computer.
root/USB/Classes/Smart Card/Visible Indicates whether the class is shown on the UI, not shown on
the UI, or disabled.
root/USB/Classes/Vendor Specific Class/ClassID USB class ID number.
root/USB/Classes/Vendor Specific Class/DisplayName USB class name.
root/USB/Classes/Vendor Specific Class/State Whether this class is mapped to the remote computer.
root/USB/Classes/Vendor Specific Class/Visible Indicates whether the class is shown on the UI, not shown on
the UI, or disabled.
root/USB/Classes/Video/ClassID USB class ID number.
root/USB/Classes/Video/DisplayName USB class name.
root/USB/Classes/Video/State Whether this class is mapped to the remote computer.
root/USB/Classes/Video/Visible Indicates whether the class is shown on the UI, not shown on
the UI, or disabled.
root/USB/Classes/Wireless/ClassID USB class ID number.
root/USB/Classes/Wireless/DisplayName USB class name.
root/USB/Classes/Wireless/State Whether this class is mapped to the remote computer.
root/USB/Classes/Wirelss/Visible Indicates whether the class is shown on the UI, not shown on
the UI, or disabled.
root/USB/Devices/{UUID}/DisplayName The name that shows in the USB Manager UI. If not
supplied, the USB Manager attempts to generate an
appropriate name using device information.
root/USB/Devices/{UUID}/ProductID Product ID of the device.
root/USB/Devices/{UUID}/State Whether this class is mapped to the remote computer. If 0,
does not redirect. If 1, uses defaults. If 2, redirects.
134 Appendix E Registry keys