HP ThinPro 5.0 - Administrator Guide

Table E-14 root > Network (continued)
Registry key Description
root/Network/HttpsProxy HTTPS proxy address.
root/Network/IPSec/IPSecRules/{UUID}/DstAddr Destination address for the IPsec rule.
root/Network/IPSec/IPSecRules/{UUID}/MMAuthMethod Authentication method for the IPsec rule. Enter PSK to use a
pre-shared key and Certificate to use certificate files.
root/Network/IPSec/IPSecRules/{UUID}/
MMAuthMethodCACert
When the authentication method is ‘Certificate’, the CA
certificate file's path is saved in this key.
root/Network/IPSec/IPSecRules/{UUID}/
MMAuthMethodClientCert
When the authentication method is 'Certificate', the client
certificate file's path is saved in this key.
root/Network/IPSec/IPSecRules/{UUID} /
MMAuthMethodPresharedKey
When the authentication method is 'PSK', the pre-shared key
value is saved in this key.
root/Network/IPSec/IPSecRules/{UUID}/
MMAuthMethodPrivateKey
When the authentication method is 'Certificate', the client
certificate file's corresponding private key file path is saved in
this key.
root/Network/IPSec/IPSecRules/{UUID}/MMDHGroup Phase 1 Diffie-Hellman group.
root/Network/IPSec/IPSecRules/{UUID}/MMEncryptionAlg Phase 1 encryption algorithm.
root/Network/IPSec/IPSecRules/{UUID}/MMIntegrityAlg Phase 1 integrity algorithm.
root/Network/IPSec/IPSecRules/{UUID}/MMLifetimeMinutes Phase 1 lifetime.
root/Network/IPSec/IPSecRules/{UUID}/QMAHEnable Enables Phase 2 AH.
root/Network/IPSec/IPSecRules/{UUID}/QMAHIntegrityAlg Phase 2 AH integrity algorithm.
root/Network/IPSec/IPSecRules/{UUID}/QMESPEnable Enables Phase 2 ESP.
root/Network/IPSec/IPSecRules/{UUID}/
QMESPEncryptionAlg
Phase 2 ESP encryption algorithm.
root/Network/IPSec/IPSecRules/{UUID}/QMESPIntegrityAlg Phase 2 ESP integrity algorithm.
root/Network/IPSec/IPSecRules/{UUID}/QMLifetimeSeconds Phase 2 lifetime.
root/Network/IPSec/IPSecRules/{UUID}/RuleDescription Description for the IPsec rule, such as purpose for creating
the rule.
root/Network/IPSec/IPSecRules/{UUID}/RuleEnable Rule enable or disable flag. When set to 1 the rule will be
enabled. Set to 0 to disable the rule.
root/Network/IPSec/IPSecRules/{UUID}/RuleName Name of the IPsec rule.
root/Network/IPSec/IPSecRules/{UUID}/SrcAddr Source address for the IPsec rule.
root/Network/IPSec/IPSecRules/{UUID}/TunnelDstAddr Tunnel destination address for the IPsec rule.
root/Network/IPSec/IPSecRules/{UUID}/TunnelEnable Enables tunnel setting for the IPsec rule. When enabled, the
rule is 'apply to tunnel mode'.
root/Network/IPSec/IPSecRules/{UUID}/TunnelSrcAddr Tunnel source address for the IPsec rule.
root/Network/SearchDomains Additional search domains for FQDN resolution can be
specified here. The specified domains will be appended to
any incomplete server definitions in an attempt to generate
an FQDN that can be resolved through DNS. For example, a
search domain of 'mydomain.com', will allow the server
definition 'myserver' to resolve properly to
'myserver.mydomain.com' even if the DNS server does not
root > Network 127